Navionics Help

 
All

SonarChart™ Live with Tide Correction & Water Level Correction


With our SonarChart Live feature within our Boating app or with compatible GPS chart plotters, you can set automatic tide adjustment (coastal) or manual water level adjustment (inland lakes & rivers). SonarChart Live will subtract the tide height (or manual water level offset) in real time from the data recorded from your sonar transducer.  The contours drawn will reflect depths adjusted for low tide using a nearby tide station verified by you.

How this works:
When a Wi-Fi sonar device is detected as connected, the SonarChart Live recording will start.  You will then be asked where you are traveling: Marine or Inland.  If Marine is chosen, you will be shown available nearby tide stations from which to make your selection.  Depending on your location, for example the proximity to an inlet, the closest tide station may not always be the most appropriate tide station.

User-added image
User-added image

Should you wish to avoid correction of any kind, simply tap the X to close the window and no adjustment will be applied to your SonarChart Live view.

Within our mobile app, depth information collected by using SonarChart Live is shared with Navionics to create SonarChart, our HD bathymetry layer available for both plotter and mobile charts.  The depth information comes to Navionics without tide correction or manual water level offset.  Navionics applies Water Level offset or Tide Adjustment to the raw data during normal processing procedures before SonarChart updates are issued.


 

Please help us improve by providing feedback on your experience with the document.

Was this document helpful?
Yes               No

Submit Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255