If you are using a Lowrance Elite Ti GPS/Sonar then you are capable of recording sonar in the Lowrance default formats which are SLG and SL2. By order of Navico, Navionics is restricted from processing those formats for use within SonarChart™. Connecting your mobile device via GoFree WiFi is the best way to contribute sonar data to SonarChart as well as take advantage of SonarChart™ Live, a real-time contour creation tool within Navionics Boating aps. https://www.youtube.com/watch?v=qHE8-i0KRpo
To begin viewing SonarChart™ Live on your mobile device using Elite Ti GoFree Wireless connection you will need:
Navionics Boating application
Lowrance Elite7 Ti
Open your mobile device settings and select GoFree WiFi, then open the App.
If that doesn’t work, first, be sure you have the password. This is the Network key found in SETTINGS > WIRELESS on the Unit.
Tap on WIRELESS DEVICES
Tap on the “INTERNAL WIRELESS” part of the box.
You will now see the NETWORK KEY. This is the password to your GoFree.
If you do not see the GoFree in your WiFi list on the mobile device, there is another preliminary step. Chances are you either do not have a Lowrance Elite Ti, or you have one set to CLIENT MODE. This means capable of connecting to a hotspot / internet. You need to change to ACCESS POINT MODE (this is the factory default).
Go back to WIRELESS inside the SETTINGS menu. Again choose WIRELESS DEVICES.
Change the mode to INTERNAL ACCESS POINT MODE
Now you will see the screen below, where the unit is set to internal wireless. Now go back to the above steps and get the NETWORK KEY you need for a password and you should see the name below “Elite7Ti...” etc. in your WiFi list on the mobile device.
Now open the app after connecting and you should see the depth widget and SonarCharts Live.
If you do not see a SonarChart™ Live Snake begin to draw with the depth window visible, you might wan to check to verify that your plotter is outputing the right data through GoFree. To do this:
Access the system Menu found on the bottom left side.
Next, Press "NETWORK" --> "NMEA 0183" --> "SERIAL OUTPUT" Should be set to ON.
Next, press "SERIAL OUTPUT SENTENCES" Within this Tree, press "GPS" and be sure "ZDA" is checked.
Press "SONAR" and be sure the "DPT", "DBT", and "MTW" are checked.
Now your plotter is ready to output the correct data and your GoFree should be broadcasting the data needed for your mobile application to use.
How to create SonarChart™ Live Close any apps that may have used the compatible device’s Wi-Fi. Connect your mobile to the Wi-Fi of the device, then open the Navionics Boating app. A new map is created instantly on-screen as you move across the water. Adjust color and transparency with Menu>Map Options>SonarChart™ Live Settings. In case your logs don’t appear on the process status page, close the app and reopen it.